dotfiles2000/system/arch/README.md

Arch Linux system Setup

How my systems are set up.

Preparation

• Download Arch Linux ISO image
• Write it to an usb drive with

$ dd if=[ARCH-LINUX.iso] of=[/path/to/usbdrive]

• Boot the computer from this stick

Prepare the disk

We will partition the disk drive for UEFI boot. The root disk will be encrypted, /boot will reside inside the unencrypted EFI service partition. The diskdevice is /dev/sda.

Partition the disk

• Write some zeros to the disk to make sure there is no bootsector left.

$ dd if=/dev/zero of=/dev/sda

• Abort after a few seconds.
• Create partitions and format them

$ gdisk /dev/sda
  | o [ENTER] to create a new empty GUID partition table (GPT)
  | y [ENTER] to confirm
  |
  | n [ENTER] add a new partition
  | [ENTER] to select default partition number of 1
  | [ENTER] to select default start at first sector
  | +512M [ENTER] make that size partition for booting
  | ef00 [ENTER] EFI partition type
  |
  | n [ENTER] add a new partition
  | [ENTER] to select default partition number of 2
  | [ENTER] to select default start at first sector
  | +60G [ENTER] allocate whatever size wanted for linux
  |
  | w [ENTER] Write changes
  | y [ENTER] confirm

Encrypt the root partition

• Create and open the root partition

$ cryptsetup luksFormat -v -s 512 -h sha512 /dev/sda2
$ cryptsetup open /dev/sda2 cryptroot

• Format with ext4

$ mkfs.ext4 /dev/mapper/cryptroot

• Mount the encrypted volume

$ mount /dev/mapper/cryptroot /mnt

Mount the /boot partition

$ mkfs.fat -F32 /dev/sda1
$ mkdir /mnt/boot
$ mount /dev/sda1 /mnt/boot

Install the base-system

• Connect to wifi

$ systemctl start idw.service
$ iwctl
  | [iwd]# station list
  |                             Devices in Station Mode                           *
  | --------------------------------------------------------------------------------
  |  Name                  State            Scanning
  | --------------------------------------------------------------------------------
  |  wlan0                 disconnected
  |
  | [iwd]# station wlan0 scan
  | [iwd]# station wlan0 get-networks
  |                                Available networks                             *
  | --------------------------------------------------------------------------------
  |       Network name                      Security            Signal
  | --------------------------------------------------------------------------------
  |       MagentaWLAN-49XA                  psk                 ****
  |       Vodafone-8154                     psk                 ****
  | .....
  |
  | [iwd]# station wlan0 connect "SSID"
  | Type the network passphrase for SSID
  | Passphrase: ********
  |

• Select a nearby (possibly faster) mirror by editing /etc/pacman.d/mirrorlist
• Install the base-system

$ pacstrap /mnt base \
                ansible \
                base-devel \
                dialog \
                git \
                intel-ucode \
                linux \
                linux-firmware \
                netctl \
                openssl-1.0 \
                stow \
                vim \
                wpa_supplicant \

• Generate fstab for the new system

$ genfstab -pU /mnt >> /mnt/etc/fstab

Configure the new system

• Chroot into the new system

$ arch-chroot /mnt /bin/bash

• Set the hostname

$ echo MYHOSTNAME > /etc/hostname

• Edit /etc/vconsole.conf to set keyboard and font

$ vi /etc/vconsole.conf
  FONT=latarcyrheb-sun32
  KEYMAP=de

The FONT setting is optional. latarcyrheb-sun32 is useful for small hidpi devices like GPD Pocket.

• Add encryption components to initramfs

$ vi /etc/mkinitcpio.conf
  ...
  HOOKS=(base udev autodetect keyboard keymap consolefont modconf block encrypt
         filesystems fsck)
  ...
$ mkinitcpio -P

• Install bootloader

$ bootctl install

• Configure the bootloader

$ vi /boot/loader/loader.conf
  default arch
  auto-firmware no
  timeout 0
  console-mode 2
  editor no

• Configure the bootloader entry

$ blkid | grep sda2 | cut -d \" -f 2 > /boot/loader/entries/arch.conf
$ vi /boot/loader/arch.conf
  title Arch Linux
  linux /vmlinuz-linux
  initrd /intel-ucode.img
  initrd /initramfs-linux.img
  options cryptdevice=UUID=[DEVICE-UUID]:cryptroot root=/dev/mapper/cryptroot rw
  fbcon=rotate:1

DEVICE-UUID is the string we added with the first command. fbcon=rotate:1 rotates the display. This is ONLY NEEDED on device like GPD Pocket.

More configuration

• Perform basic systemconfiguration

$ git clone https://github.com/elfrinjo/syssetup
$ cd syssetup/dotfiles
$ stow */
$ cd ../system/arch
$ sudo ansible-playbook baseconfig.yaml

• Change the root password

$ passwd

• Create useraccount

$ useradd -m -G sudo [USERNAME]
$ passwd [USERNAME]

• Exit the chroot

$ exit

• Shutdown the system

$ shutdown -h now

• Remove usb-drive
• Start the computer
• Enter drive encryption password
• Logon as the newly created user
• Connect to wifi

$ sudo wifi-menu

• Perform more system configuration

$ git clone https://github.com/elfrinjo/dotfiles
$ cd syssetup/dotfiles
$ stow */
$ cd ../system/arch
$ sudo ansible-playbook workstation.yaml

• At some point the Desktop will start. When this happens, just log on and continue inside a terminal
• Update the system

$ pacman -Syu

• Reboot

$ reboot